
BPL Dynatrac Ultra Cardiac Stress Test System
The BPL Dynatrac Ultra is a cardiac stress test system that pairs advanced analysis software with a treadmill and recording device, available in both wireless and wired configurations to suit your clinical setup.
Product description
Key Features:
Wireless-enabled premium treadmill system
Dynatrac Neo software with HES algorithm
Dynatrac Neo BT acquisition unit, with battery status indicator for low-battery alert
SunTech NIBP module with Orbit-K BP cuff
Auscultatory R-wave gating using K-sound analysis for all static and active phases of stress testing
Technical Specifications:
Dynatrac Ultra Wired-ECG Acquisition Device
Power Source: Through USB connected to the PC
Power Consumption: < 1 W
PC Communication: Through USB
Safety Classification: Class I as per IEC 60601-1
Degree of Protection: Type CF
Operating Temperature: 10 to 40°C
Relative Humidity: 20–90%, non-condensing
Storage Temperature: −20 to 60°C (except ECG electrodes)
Dimensions: 170.5 mm (L) × 106.5 mm (W) × 22.5 mm (H), excluding cables
Data Acquisition
Sampling Rate: 1000 samples/sec
Acquisition: Simultaneous 12 lead acquisition, 16 bits
Leads: Standard 12 leads; acquired 8 leads; reconstructed 4 leads (III, aVR, aVL, aVF)
DC Offset Voltage: ±300 mV
Input Dynamic Range: ±10 mV
CMRR: ≥ 90 dB
Defib Protection: Internal
Patient Leakage: <10 µA
Frequency Response: 0.5 Hz to 100 Hz
Digital Filters (Linear Phase): Mains Interference 50 Hz Notch Filter (always present) Auto or 0.5Hz (-3dB) (selectable)
Signal Processing
ECG Analysis: 200 samples/sec
QRS Detection: Single lead (selectable, automatic switching to lead II if lead II is good and selected lead is noisy); default V5
Calculated Parameters: ST-Level, ST-Slope, HR, METS
Fiducial Points: Auto or Manual Selection
Enlarged Median Lead: Auto Lead Selection (Lead having maximum ST level) or Manual Lead Selection
Display
Resolution: 1024 × 768 pixels (minimum)
ECG Display Format: 3-lead, 6-lead, or 12-lead median (selectable)
ECG Display Speed: 25 mm/sec or 50 mm/sec (selectable)
ECG Display Sensitivity: 5, 10, or 20 mm/mV (selectable)
Event Marker: Yes
Displayed Data: HR, Target HR, BP, Stage Time, Test Time, Speed, Grade, METS, Protocol Name, Protocol Stage, ST-Level, ST-Slope, Leadoff Information, Patient Name, Battery Level Indication (Wireless Device)
Filter: 20 Hz, 40 Hz, or No Filter (selectable)
Printing
Print Format: User-defined reports
Printout: With/without grid
Paper Size: Plain Paper A4 Size
Printing Speed: 25 mm/sec
Printing Sensitivity: 10 mm/mV
Printouts: Automatic stage printouts and real-time printouts (selectable)
Data Storage
Local Storage: On hard disk, separate folder for every test
External Storage: Selected records can be exported to external storage devices
Treadmill
Speed: 0–10 km/h
Minimum Speed Increment: 0.1 km/h
Speed Accuracy: ±0.2 km/h
Elevation: 0–22%
Minimum Elevation Increment: 0.1%
Elevation Accuracy: ±0.5%
Patient Load: 130 kg (maximum)
PC Interface: RS-232
AC Mains Voltage: 230 ± 10%, 50 Hz
Current Input: < 5 A
Device Protector Switch: 6 A (Circuit Breaker)
Emergency Switch: Yes
Side Rails: Yes
Dimensions: 2000 mm (L) × 1310 mm (H) × 750 mm (W)
Walking Surface: 1430 mm (L) × 480 mm (W)
Operating Temperature: 10–40°C
Relative Humidity: 20–90%, non-condensing
Minimum PC Configuration
Processor: Intel Core i3 CPU / 1 GB RAM / 512 GB HDD
Operating System: Windows 7 or above with .NET Framework 4.6.2; 64-bit OS required for HES® option
Color Monitor: 17 inches
Display: 1024 × 768 to 1920 × 1080 (1920 × 1080 preferred)
USB Ports: Three for wired and four for wireless




